WEMSoutside sensor

WEMSprogrammer

The WEMSprogrammer is an embedded computer system that hosts WEMS international"D5s wireless building energy management application software, along with web server and other services that maybe required.For communication with WEMS wireless modules the WEMS USB wireless interface module (ASD03N) is attached.

Wireless system processor 12vdc powered with the following interfaces: 1 x Ethernet port RJ45, 2 x RS232 ports 9 way male ‘D’ Type, 3 x USB ports, 1 x RS232 console port RJ45 and 2GB memory SD card.

Download the Datasheet

WEMSUSB

The WEMS USB Module provides a wireless interface to WEMS wireless modules via a USB host port on the WEMSprogrammer.
Download the Datasheet

WEMSSERIAL USB/485

Wireless USB module available in 434MHz and 915MHz narrowband. Connected to the WEMSprogrammer this module provides the wireless mesh network to communicate with multiple WEMSRSCOMS wireless modules.

WEMS SERIAL 232/485

Wireless RS485/RS232 communication module. This module can communicates to MODBUS/Backnet and VT100 equipment and send the data wirelessly to the WEMSProgrammer.

WEMScontroller1

Wireless controller 240vac powered with the following I/O: 1 x Relay output switching 8 amps at 240v with Common/Normally Open/Normally Closed contacts, 4 x Digital Inputs for alarms, status or pulsed meter inputs and 2 x Thermistor input for temperature or light level sensing.
Download the Datasheet

WEMScontroller3

Wireless controller 12vdc powered with the following I/O: 3 x 0-10v analogue outputs for modulation control, 2 x 0-10vdc / 4-20mA analogue inputs for industry standard transducer inputs.
Download the Datasheet

WEMScontroller4

Wireless controller 12vdc powered with the following I/O: 4 x Relay output switching 8 amps at 240v with Common/Normally Open/Normally Closed contacts, 6 x Digital Inputs for alarms, status or pulsed meter inputs and 2 x Thermistor input for temperature or light level sensing.
Download the Datasheet

WEMSsensor Outside Air Temperature & Light Level

Wireless outside air sensor battery powered with the following inputs: 1 x On board temperature sensor, 1 x on board Light sensor and battery voltage monitor.
Download the Datasheet

WEMSsensor Temperature

Wireless room sensor battery powered with the following inputs: 1 x On board temperature sensor, 1 x thermistor input, 1 x Digital input and battery voltage monitor.
Download the Datasheet

WEMSsensor Temperature & Light Level

Wireless room sensor battery powered with the following inputs: 1 x On board temperature sensor, 1 x on board Light sensor, 1 x Digital input and battery voltage monitor.
Download the Datasheet

WEMSsensor Temperature, Light Level & Presence

Wireless room sensor battery powered with the following inputs: 1 x On board temperature sensor, 1 x on board Light sensor, 1 x IR Presence detection, 1 x Digital input and battery voltage monitor.
Download the Datasheet

WEMSsensor Duct

Wireless room sensor battery powered with the following inputs: 1 x On board temperature sensor, 1 x thermistor input, 1 x Digital input and battery voltage monitor.
Download the Datasheet

WEMSmeter Input

Wireless IP65 Zone Zero rated sensor for connection to any volt free pulsed output meter Gas/Water/Electric.

WEMSuniversal sensor

Wireless IP65 module sensor battery powered with the following inputs: 1 x On board temperature sensor, 1 x thermistor input, 1 x Digital input and battery voltage monitor
Download the Datasheet

WEMSclamp sensor

WEMSclamp sensor is a battery powered wireless sensor for WEMS International’s wireless building energy management system.
Download the Datasheet