Controller 3

The Controller 3 is a 12V DC powered intelligent wireless analogue input/output module, providing three analogue 0-10V outputs and two 0-10V DC inputs.  

 

Features

  • High performance wireless narrow band operation with up to 2km line-of-sight range
  • Multi-hop wireless protocol
  • 3 × 0-10V analogue outputs with analogue output status LEDs
  • Analogue output override buttons
  • 2 × configurable analogue inputs
  • Signal test/discovery button

Specification

Temperature & humidity

Operating temperature range -10 to +50°C

Operating humidity 75% RH (Non condensing)

Storage temperature -20 to +85°C

Storage humidity <90% RH (non-condensing)

Cooling Convection

 

Power

Supply voltage 12VDC regulated (+/- 0.5V)

Current consumption 200mA (3.6W) max

Ripple/noise 100mV p-p max  

 

Analogue

Analogue outputs 0-10VDC (20mA max)

Analogue output resolution 5mV (10-bit)

Analogue output accuracy +/- 0.05V

Analogue inputs 0-10VDC or 4-20mA (Current loop)

Analogue input resolution 5mV (10-bit)

Analogue input accuracy +/- 0.05V

 

RF data

RF frequency 433.05 – 434.79MHz

RF output 8dBm max

RF sensitivity -115dBm

RF bandwidth 25kHz (Narrow band)

RF channels 69

Antenna connector Female 50Ω SMA (SubMiniature version A)

 

Misc

Terminal covers UL94-VO, IP20 finger protection

Enclosure UL94-VO flame retardant PC, IP20 rated

Mounting 35mm DIN rail (EN 50022, BS 5584, DIN 46277-3) or direct surface mount. Optional adaptor for G rail mounting  

 

Weight & dimensions

Weight 133g (without antenna)

Width 71mm

Height 90mm

Depth 58mm 

Compliance

EMC

EN 301489-1: 2008

EN 55022: 2006

EN 61000-4-3: 2006

EN 61000-4-2: 2001

EN 61000-4-4: 2004

EN 61000-4-5: 2006

EN 61000-4-6: 2005

EN 61000-4-11: 2004

EN 61000-3-3: 1995

Safety

EN 60950: Information technology equipment

EN 60730: Automatic electrical controls

EN 50366: Domestic equipment

Wireless

EU R&TTE directive for 25kHz

EN 300 220: EMC standard for short range devices

EN 301 489: EMC standard for radio equipment and services

 

Certifications

CE2 ROHS2 

Become a partner today

Becoming a partner and using our wireless I/O couldn’t be easier. To get started, just request a call back from our partner manager.

Share This