Integrate WEMS wireless I/O & sensors with your BMS system

Combine the power of our robust wireless sensors & I/O with your BACnet® IP compatible BMS system.

Why use wireless I/O?

Why use wireless? Install faster!

Install faster

Using our wireless I/O, systems integrators can greatly improve their installation speed, particularly in a retrofit scenario. Without walls to go through, ceilings to go over or floors to go under,  installation time can be reduced by up-to 30%.

Why use wireless? Reduce your risk!

Reduce your risk

Because our wireless I/O is less invasive, installation can often be completed during business hours, reducing disruption, time on site and out of hours working. It also reduces the safety risks and exposure to asbestos.

Why use wireless? Install in more sites!

Install in more sites

Faster installations mean you can complete more projects than ever before. Our wireless IO also opens up the ability to install in smaller sites, sites with more difficult infrastructure, or even sites with more remote outstations.

Why use wireless? Robust Communications!

Robust Communications

Our I/O has been designed from the ground-up as a wireless system by our development team. Wireless isn’t an ‘add-on’, it’s everything we do, and it shows in our install base of over 5,500 sites worldwide, in a variety different spaces.

NEW

Wireless Duct CO2 Sensor

The WEMS CO2 duct sensor is a battery powered wireless device; providing CO2 measurements with a range of 0 to 5,000ppm. Designed to be mounted on air ducting for monitoring of ventilation and air conditioning systems, typical on the supply and return.

Wireless Differential Pressure Sensor

The WEMS Differential Pressure Sensor provides measurements with a range of -500 to +500 Pa. It is typically used in ventilation systems to monitor filters (filter dirty detection) and differential air pressure in clean rooms. 

DEMO

BACnet® Gateway – a quick tour

Watch our quick video guide showing you just how easy it is to discover WEMS Wireless I/O & sensors into our BACnet® Gateway and make them available as a BACnet® Objects to your BACnet® IP compatible BMS system.

In this short demo, Andy will discover some I/O, configure the BACnet objects and provide some insight on just how simple our wireless BACnet® Gateway is to use.

Download our product brochure to view our full product range, including wireless I/O, sensors and accessories.

Product Brochure - WEMS Wireless I/O and Sensors
Designed and manufactured in the UK

Proudly designed & manufactured in the United Kingdom | BACnet® is a Registered Trademark of ASHRAE | WEMS Limited© | Registered in England. Company No. 09727151 | WEE Reg: WEE/AA1747YV

Designed and manufactured in the UK

Proudly designed & manufactured in the United Kingdom | BACnet® is a Registered Trademark of ASHRAE | WEMS Limited© | Registered in England. Company No. 09727151 | WEE Reg: WEE/AA1747YV